Rear Bike Light mount (OLIGHT SEEMEE 30)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting method for an OLIGHT bike light.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This a mount that I designed for an OLIGHT rear bike light (Specifically this one which I would recommend).
There is a 27.2, 30.9 and 31.6mm option.
It comes in 3 parts 2 of which either push together or glue together depending on your preference and printer setup. Mine just push together and I don't have any issues.
What you will need
1 x M3x10 cap head screw
1 x M3 Nylock
1 x 4x16mm dowel pin OR an M4x20 screw and nut/Nylock
Optionally: 1 x M3 washer
Printing notes
The 2 main parts need to be printed with supports and they have offsets to make the parts fit together better. Print the parts with the tapered bits facing up as shown in the picture.
Extra
I've also included some step files which are free of minor cosmetic radii and chamfers so that you can edit them more easily if you wish to make any changes to the model.
In my standard model I have allowed space for the seat tube clamp. Its possible that your clamp may be bigger than what I have allowed for… sorry.