Crane truck crank replacement - revival of a 30 year old crane truck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the crank of an old crane truck
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 1224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction:
My kids start playing with the old car toys of my wife.
One crane truck had a cracked crank so the hook could not be lifted any more.
This is the replacement for this crank.
Information about the part:
- The achsis diameter is 4,8 mm. It's made for 5 mm holes.
- The distance between both knobs is 27 mm.
- Both parts are held together with an M4 x 16 countersunk head screw which will cut it's own thread. The achsis inner hole is 3,5 mm
Compatibility:
I could not find any marking about a brand or model name of this crane truck. It's more than 30 years old so probably a lot of old crane trucks have this part.
Assembly:
Fixating a string is quite easy. There is a small hole on the side of the achsis. Just slide one end of the string in and the do some knots until it does not slide back through.
Mount everything in place and now the old crane truck can be used again!
Result:
After 30 years this crane truck now works again and our kids love playing with it!
If you like my work and want to support it you can do it here:
https://paypal.me/sebastiandruckt 