pressure washer sprayer holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
it was very annoying trying to wheel the pressure washer around with the sprayer flopping around. it'd rub on the…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 640
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
it was very annoying trying to wheel the pressure washer around with the sprayer flopping around. it'd rub on the ground, get stuck in the wheel, and generally get in the way. I have no idea how this was supposed to work. I made a holder that clamps on to the frame of the power washer and gives the sprayer tip a place to rest, so it doesn't run in to anything. it's a pretty good friction fit, it just snaps on, but for good measure I used 2 zip ties as well. now I can wheel this thing around easily.
update:
this didn't hold on well enough not to move. I found it was rotating out of the way, sliding down, and not working very well. The engine does shake a bit when it's running, so I shouldn't be too surprised. To fix this, I added a small pocket in the previous model to rest on a peg, then I drilled and tapped an M4 hole in the metal tube of the pressure washer, and put a screw in it. I probably should use locktite as well. Now the holder rests on that screw peg, and it won't slide down or rotate out of place.
Category: Tool Holders & Boxes