1 / 2
prusa style printer y axis belt tensioner (roaddog bart) — zdjęcie 1
1 / 2

prusa style printer y axis belt tensioner (roaddog bart)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I have a roaddog bart (well, based on that, now renamed bert :) ) printer. When I got it, the y axis belt tensioning…

Ocena
0 / 5
Polubienia
2
Pobrania
23
Wydruki
0
Wyświetlenia
273
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have a roaddog bart (well, based on that, now renamed bert :) ) printer. When I got it, the y axis belt tensioning was nonexistent, and the belt was just wrapped around a couple m3 screws and ziptied to itself, gross.

I completely replaced the the extruder on this printer with a pit stop: https://mihaidesigns.com/pitstop

it's absolutely fantastic!

it also is really well designed, with a lot of subtle niceties. So, when I've been running into problems with this bert printer, I often end up copying parts from the pit stop.

In this case, I copied the belt tensioning mechanism. it's very nice for holding the ends of the belt, allows for a little too long belt to be used without needing to cut it, and it's got a really nice tensioning mechanism with good adjustment (and a decent range too).

the bart originally had 2 laser cut wood pieces with t slots and nuts for connecting the bed to the belt (and those m3 screws). The top of this print interfaces with the same holes and mount, and adapts to the belt holder.

it's not ideal having the belt tensioner adjustment under the bed like this, but it's not too hard to get to.

Print Settings

Printer:

Bert

 

Rafts: 

No

Supports:

 

No

 

Resolution: 

0.15

Infill:

 

20

Filament: prusament asa orange

 

 

Category: 3D Printer Parts

Tagi