1 / 4
K1 HEPA+Charcoal filter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear mount HEPA+Charcoal filter for Creality K1
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 340
- Wydruki
- 4
- Wyświetlenia
- 2878
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (99)Powiązane
Another variation on adding filtration to the Creality K1. This one includes HEPA (for particulates) and activated charcoal (for VOC, volatile organic compounds) in one snap-on assembly requiring no modification of any sort to the K1.
Some acknowledgements:
- Basic model based on my previous activated charcoal-only filter: https://www.printables.com/model/536521-k1-expanded-filter
- Although I might like a higher static pressure fan the OEM fan does seem to push a good amount of air through the filter stack.
- Given the size of the HEPA filter my new design has less surface area than I would like (the basis for the “expanded” filter).
- Addition of HEPA filter influenced by: https://www.printables.com/model/599721-creality-k1-hepa-filter-housing
- As noted in the reference filter it might be better to “suck” by moving the fan to the back, but given the space required and the ease of using my approach I think my new design is a good tradeoff.
- Note that my design does not have an actual seal, something I might think about adding in the future. But it's not bad.
Consumables:
- HEPA filter: https://www.amazon.com/dp/B07QKM39J1
- Activated charcoal: https://www.amazon.com/gp/product/B07YM3JVGG?th=1
- My design fits two layers of the referenced cut-to-size material.