Zip-Tie Mount for Oontz Speaker (or whatever...)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2-Piece mount for Oontz bluetooth speaker
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to mount my Oontz bluetooth speaker to the ceiling of my van, so I designed a zip-tie mounting base for it. The back piece goes behind the ceiling pan and the front piece screws into it. The slots are sized for standard cable ties, and the corners are cut out to make space for the Oontz feet.
The screw holes and nut slots are designed for 3mm (M3) screws.
I printed it in black ASA because that's what I had on the printer, but I don't think it matters what you print it in. Use the screws to pull the nuts into their cutouts if you're having trouble pushing them in by hand.
I have since used the same mount to zip-tie other speakers and you could use it for almost anything.