Titan Aero in Delta Anycubic predator effector / Volcanic hotend / berd air cooling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The effector can be used in Delta printer and it fits perfect with anycubic predator.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The effector can be used in Delta printer and it fits perfect with anycubic predator
It uses Titan Aero / 23mm 42Step motor / Volcanic heat block / 3mm berd air to the cooling
I have prototyped it again and again, and Now it works perfectly!
The design is so thick because it can avoid printing defects caused by the twisting of the effector at high speed, and still maintain a good light weight of the printed parts.
The tool you need to prepare is an M3 pipe tap because I design it with a smaller hole in some place so that after tapping I can make it fit perfectly.
You have to prepare those parts in this design.
9x M3 nuts
6x M3 Nyloc nut (Thickness 4mm)
6x M3 washer (Thickness 0.5mm)
6x M3X30 (Countersunk flat head)
3x M3X30 (Button head socket)
Titan Aero kit (new version)
Volcanic heat block and extended nozzle to fit with.
The Step file here can download https://a360.co/46fR7bo
You can make your version, but I don't want anyone to sell it. Thanks!
If you like my job, please buy me a coffee, thank you !
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3mm Layer High
Infill:
Line Spacing 6mm
Filament: ABS, Don't try it with PLA
Notes:
The recommended wall thickness for printing is 1.6mm. If it is too thin, the tapping strength will not be good, and if it is too thick, the cooling stress will be too high and the object will warp, making the printing failure.
Category: 3D Printer Accessories