1 / 4
Creepy House with Pumpkins Halloween Card - Hueforge Print — zdjęcie 1
1 / 4

Creepy House with Pumpkins Halloween Card - Hueforge Print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Happy Halloween! This is a print in place hueforge Halloween card that no one will think of throwing away if they…

Ocena
4,75 / 5
Polubienia
33
Pobrania
108
Wydruki
5
Wyświetlenia
673
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Happy Halloween!

This is a print in place hueforge Halloween card that no one will think of throwing away if they receive it!

Post Processing Instructions:

Once printed, you will need to have a lighter, or a blowtorch to heat up the middle seam (it's the thin one down the middle of the print) to make the card ‘foldable’. Once you've heated it up enough, you will be able to fold it into a card. Do it slowly, and bit by bit so it doensn't accidentally warp other areas of the card.

Options:

I have provided the STLs for both the card as well as JUST the Halloween image, if you're not interested in the card format. Both instructions for the hueforge print are exactly the same.

Print Instructions:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:

  • PLA Siddament Black Transmission Distance: 0.2
  • PLA+ Sunlu Orange Transmission Distance: 5
  • PLA META Sunlu White Transmission Distance: 9.6

Swap Instructions:

  • Start with Black
  • At layer #28 (1.24mm) swap to Orange
  • At layer #39 (1.68mm) swap to White for the rest.

Category: Other

Tagi