Parametric Featherboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Woodworking featherboard with replaceable fins and a parametric design.
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 436
- Wydruki
- 4
- Wyświetlenia
- 2029
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Featherboard with replaceable fins. Should you accidently cut or break them, you have less to reprint. Designed for ¼ T-Bolts.
This was designed as a parametric model in Autodesk Inventor. You can easily change the length of the slots, width of the fins, width of the featherboard, etc and it automatically adjusts.
I've presaved some common configurations you may want, such as a short fin and long fin version of the feathers, along with 3 sizes of the holder with different length tbolt slots with a 3.5in, 5in and 7.5in variant.
I printed at 30% infill with PLA. I also made a small area around the threaded insert 100% infill just to give it extra strength. You can do that in Cura by adding support blocker cubes and changing it to “Modify settings for overlap”.
Assembly
Print 1 holder and 1 feather insert.
Requires three #8-32 x ½ countersunk machine screws and #8-32 Brass Insert.
I use the following: