Gardena 3/4" Pipelinesystem Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Plug for Gardena's old 3/4" pipeline system.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Simple Plug for Gardena's old 3/4" pipeline system.
My old plug was leaking so I created this to replace the old one. Should be printed with a tough material since some pumps can build up quite some pressure. I used Filamentum ASA since my plug will be exposed to UV light. I added solid layers at the bulges in the PrusaSlicer project file to increase overall strength. I tested the plug with a pump that creates a nominal pressure of around 0.8 MPa so it should be safe for normal operation.
Please make sure that the plug sits firmly on the end of the pipe or it might get loose and possibly hurt someone.