Car hanger // bag holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hanger with bag holder for the car (Ford Focus), created with Fusion 360.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 215
- Wydruki
- 2
- Wyświetlenia
- 1489
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I created this pattern to have a built-in hanger in the car and no longer have to bring it from home! I also added two hooks to hold two bags just in case. 👔🛍
The pattern is printed in black PLA and is adapted for the Ford Focus, it needs supports because there are overhanging parts (see photo) and in total the print time is about 5 hours and 20 minutes with these settings:
- Print speed: 60 mm/s;
- Layer height: 0.3 mm;
- Filling: 30%;
Obviously the printing time is variable, unfortunately I do not own a Bambo Lab…slow and steady wins the race! 🤣🤣
The total width of the pattern is about 283 mm (my printing plate does not allow me to go beyond that), it is not very large but I can assure that it works very well even with quite heavy jackets or bags!
I hope you enjoy it! 💪🤗