K40 Interlock Switch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Description: Designed this mount for some simple V-156-1C25 micro switches…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Description:
Designed this mount for some simple V-156-1C25 micro switches (https://www.amazon.com/gp/product/B01MQPQGFQ) to actuate when the laser and electronics lid of the K40 are closed. You will need to drill 2 mounting holes. Make 2 identical 3d prints, just flip one the other way around for the electronics lid (see pics). Secure and adjust the switch height of the laser side with 2 x 12MM screws and the brass spacer then use 2 more 12mm screws to attach the the electronics side to the other side of the brass spacers.
In addition to the mechanical switch safety interlocks I have also added a self locking relay module (https://www.amazon.com/gp/product/B08D7DPVC5), this module resets everytime the power is removed and a relay on a 3 second timer (https://www.amazon.com/gp/product/B08HVBSCXW) this relay will only close after a few seconds have elapsed from power on. These are wired onto a board that lights a LED whn all the safety interlocks are closed.
Bill of Materials:
2 x 3d printed part
8 x 12mm M3 Socket Cap Hex Drive Screws
2 x 10mm M3 Brass Female Female Spacer/Standoff
K40 Safety Interlock Switch Mount
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament: Monoprice PLA+ White
Category: Parts