1 / 9
K40 4" Exhuast to 8" Harbor Freight Portable Ventilator — zdjęcie 1
1 / 9

K40 4" Exhuast to 8" Harbor Freight Portable Ventilator

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Description: This is to adapt the K40 4" exhaust to a harbor freight 8" portable ventilator…

Ocena
0 / 5
Polubienia
9
Pobrania
24
Wydruki
0
Wyświetlenia
342
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Description:

This is to adapt the K40 4" exhaust to a harbor freight 8" portable ventilator (https://www.harborfreight.com/8-inch-portable-ventilator-97762.html). There are no modifications required to the ventilator, and the latches make attachment/detachment easy so it can be easily stored or used elsewhere when not used by the K40.

You will need to drill two holes on opposite sides of the galvanized steel reducer to attach the latches and you will need to bend the latches slightly to match the shape of the steel reducer (see pictures for details). The toggle latches are attached using the screws with 2 hex nuts each to lock them in place. The 3d printed parts are friction fit, glue them if you need to.

Bill of Materials:

2 x 6mm M3 Philips Button Head Screws

4 x M3 Hex Nuts

2 x Buckle Spring Loaded Hasp Toggle Latch (https://www.amazon.com/gp/product/B07W118MF1)

1 x Galvanized Steel Reducer, 8 in x 4 in Duct Fitting (https://www.grainger.com/product/6EKK8)

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

20%

Filament: Monoprice PLA+ White

Category: Parts

Tagi