Enclosure for Cheerful Electronic's Piano Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom enclosure for the Piano Keyboard kit from Cheerful Electronic.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
A custom enclosure I built for the Piano Keyboard from Cheerful Electronic.
Snap together fit. Does not require any extra hardware (no screws, nuts, pins, etc). The keys slide like pistons in open cylinders to keep them centered on the buttons. There's a recessed section with openings for the user buttons and holes for the piezo buzzer and volume pot.
The top and bottom sections have cutouts to reveal the logos silkscreened on the Piano Board PCB.
For the best print, the recessed area for user buttons (on the enclosure top) needs supports enabled. Nothing else in the print requires supports or brims.
On a Prusa MK3S+ I used a 0.20mm Quality setting for a very nice finished print.