Standing support router Asus RT-AC88U Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for a stand to place my router upright. It's a bit longer and thinner than the original, but same…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I was looking for a stand to place my router upright. It's a bit longer and thinner than the original, but same general profile. Router is stable enough with support across.
I created some support sticks. I needed to drill the existing holes out a little further for them. I used PETG. This was a poor choice, but good enough until I can go to the grocery store and get a pack of skewer sticks.
I've included the f3d files for anyone interested in making a quick modification.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
.3
Infill:
15
Filament:
Prusament PETG Clear
Notes:
Print on side. No supports needed for anything.rnrnUse a more rigid material than PETG for the supports. Preferably use wooden dowels or skewer sticks for cross bracing. If you do decide to use the support sticks, you may need to make adjustments to the stand model or just use a slightly larger drill bit and drill the holes out a little bit larger.rnrnUse 3 perimeters.
Category: Computer