Speaker stand tripod adapter (for EGO Power+ LT1000 work light)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts a 35 mm speaker stand to a 5/8"-11 bolt for EGO Power+ LT1000 work light
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 1258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I own the EGO Power+ LT1000 portable area light. It is a pretty great product, but positioning it can be tricky. There are threaded holes on the bottom, but the 18 pound weight of the light + battery is too much for most tripods. However, you can buy speaker stands for cheap that will hold more than 100 pounds no problem. All that remains is to make a weird bespoke adapter, which is the kind of task where 3D printing excels. So here it is. Aside from the printed part you only need a 5/8"-11 by 1 ½" hex head bolt.
Use at your own risk! This feels pretty sturdy to me, but only time will tell if it holds up. I'm publishing it now so others can try it out and modify if needed. STEP and Fusion 360 files are provided.
The fit to the bolt and the speaker stand are very tight. Be prepared to use some force, and you might need to scale up the print a tiny bit depending on your exact setup. Adjust perimeters, infill and anything else you need to achieve a strong print.