Sockets Rail Gridfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sockets storage for a Gridfinity toolbox setup.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A sockets organizer for those of us that have more than one brand of socket, or copies of the same size socket, in our toolbox! Works for any size socket that has a 1/4", 3/8", or 1/2" drive. Designed so that the base of the socket sits directly on the rail face and slides freely. The knobs are modelled as exactly .25" .375" and .5" squares (every socket in my toolbox is oversize slightly, so fitment is nice).
22.25mm tall overall
Everything can print without supports, but to have clean magnets holes on the rail bottoms, you will need to support those. The 1/2" drive knob will only print without supports if you have the top of the drive on the build plate like shown in the picture, the rest of the knobs print base up.