Duplo brick generator - sloped roof with tiles and chimney
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duplo brick generator which makes sloped roofs with nice round tiles. Does not exactly copy any genuine Duplo brick.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- GNU Lesser General Public License
Duplo brick generator which makes sloped roofs with nice round tiles. Does not exactly copy any genuine Duplo brick (as you can see the blue one on photos) but it fits and it's similar in feel. There several pregenerated STL files:
- 4x4x2 size (as you can see on photo the genuine brick is 4x4x2.25)
- 4x4x2 size with chimney platform
- 4x2x2 size
- 4x8x2 size (extra ribs for easier no-support printing and structural rigidity)
- 2x2x1 chimney with bottom connector and hole on top instead of studs on top. Should be printed upside down for support less print.

It is meant for supportless print, but I suggest more precise 0,2mm layer for nice sloped tiles. Mine was printed with small 0,2mm extruder on Creality Ender S2. It might need brim for good adhesion during printing as there is bottom radius on side walls or lower the model on Z axis to -0,2mm (minus one layer) to properly stick model on the base plate.
The generator file is for OpenScad program which is open source, free for everyone. Just be aware that the rendering for export might take an hour or so depending on your PC.
Each printer and filament can have slightly different finished print size, so you might need to go into the generator and fine tune the “base_unit” variable as puting the printed bricks on top of original Duplo brick depends on good tight fit. I had to actually modify the base_unit from 15.5 mm to 15.8 mm with my red PLA.
