Shower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The idea for this shower came from situation where the celling is short (2,15m), and there is no space for regular…
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 364
- Wydruki
- 1
- Wyświetlenia
- 4984
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
The idea for this shower came from situation where the celling is short (2,15m), and there is no space for regular shower (that is over your head and not just the shoulders). This shower mounts directly to the celling.
Depending on the flow and pressure you might want to enlarge or reduce holes on the shower to avoid pressure build-up and lower part of the shower poping out during use.
The pipe thread to the water source is BS 1/2.
I'm thinking of making a small hole on the top so that the water can drain after use (currently I have to detach the pipe).
I used:
- variable layer size to print threaded sections at 0.1 and the rest at 0.3, to avoid long print times
3 perimeters to avoid leakage Be sure to use teflon tape on pipe thread which is printed horizontally to prevent leakage.
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
No
Supports:
No
200
Infill:
20
Filament:
Prusament PETg
Category: Bathroom