Yet another F...reaking delta
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Almost finished delta printer designed from scratch. In order to build one yourself you would need 3030 aluminum…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Almost finished delta printer designed from scratch. In order to build one yourself you would need 3030 aluminum extrusions, 10mm square rods (hardware store), obviously an extruder as well as a hotend, 608 bearings, some zip ties, screws M3-5, 12 ball heads, stepper motors + board and some m3 threaded rods.
Also 3 pulleys are needed, i may recommend https://www.thingiverse.com/thing:2864135 .
I will upload further BOMs and build instructions along the weekend.
Print Settings
Printer:
Homemade Prusa i3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.3-.5mm
Infill:
some 20%, stator at 100% recommended
How I Designed This
The whole source file is added as designspark mechanical file.
Category: 3D Printers