Sanding Paper Holder 6" (150mm) Dia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Following the Moses Hightower for Sanding Discs brilliant design See prints/59583 I've planed the attached Holder.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 258
- Wydruki
- 2
- Wyświetlenia
- 1558
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Mr benoitmeunier brilliant design, see https://www.prusaprinters.org/prints/59583 was very near to my needs in keeping my Sanding Paper handy. Thanks again to benoitmeunier for his kind suggestion to plan it for my needs as the paper size for my grinding tool is 6" Dia however I wanted to sharpen my experience with Fusion 360 I've decided to plan it by myself.
The trays are fast glued to each other. I added a Holder that can be used as a clamp that support the assembly when one wants to fix it to a wall.
All prints should use Supports.