Pinball EM Pop Bumper Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EM Pinball Pop Bumper light DIY. I saw the Stern ones and thought, I can make one of those.
- Ocena
- 4 / 5
- Polubienia
- 27
- Pobrania
- 167
- Wydruki
- 2
- Wyświetlenia
- 1004
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
EM Pinball Pop Bumper light DIY. I added all the stl so you can print it in parts if you wanted to since not everyone has an AMS. The added BBL 3mf has all the triangles painted on. The 3mf is also saved with tree support (auto) and it was a pain to remove, may want to try one of the other supports. I'm no pro modeler and couldn't seem to get the triangles separated to create their own stl. I did end up with a little red color bleed on the top disk above the triangles, but these pop bumper caps have been far from perfect anyway.
The top cap threads onto the base. There is the holes to wall hang it and a hole to run the wire through if you create a lamp/light with it.