Side mount bracket for the DX15V front panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket that can be attached to the front panel of a Optimum DX15V drillpress in order to mount anything you want.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This a bracket that can be attached to the front panel of a Optimum DX15V drillpress in order to mount stuff to the side of the machine. I am using this to attach a switch for turning my vacuum on and off (see photos).
The bracket is mounted by using the orginal screws of the machine. Then anything else can be attached to the bracket’s side, using two or more M4 screws. Just insert up to five M4 screw nuts into the holes of the bracket. The mount holes are 32/50mm apart in vertical direction. The 3 center holes are exactly vertical, the topmost and bottommost holes are shifted 10mm to front/back).
Use the bracket at you own risk! Do not attach anything too heavy to the machine!
I think by mirroring the design you can even attach smaller things to the right side of the front panel.
happy printing!
Print Settings
Rafts: No
Supports: No
Resolution: variable 0.25...0.1mm
Infill: 20%
Filament: PETG (purple?)
Happy Printing!
If you like this design, then please leave a like and also post a photo in the comments. Also check out my other designs.