1 / 4
Suptek Triple Monitor Arm Extensions
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Arm Extensions for the Suptek MD6463 Triple Monitor mount
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I was having issues getting a good FOV for iracing with my Asus Tuf 27'' monitors. I designed these when a previous model I downloaded and printed was too large for the square tubing for the Suptek MD6463 arms. You will need 2 M8x40 bolts and 2 M8 nuts.
Print in the orientation provided. I printed mine at a .2 layer height with 4 walls, 4 top and bottom and 40% infill in ABS. PLA would probably work, But I feel PETG would have too much flex.