Minneapolis Minnesota - Downtown
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of downtown Minneapolis, MN. I was inspired by this company. https://microscape.co/ It was created…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 662
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
This is a model of downtown Minneapolis, MN. I was inspired by this company. https://microscape.co/
It was created with photogrammetry and Google Earth. It is actually a photogrammetry scan of the photogrammetry 3d data that is now being implemented into Google Earth in select cities. So it's kind of a copy of a copy.
The model might come into your slicing software a bit large. So scale it down to whatever you'd like. The one in the photos was printed at 15x15 cm. Depending on your printer you might be able to go down to 10x10 cm but any lower and you'll be missing some details.
Print Settings
Printer:
Anet A8
Rafts:
Doesn't Matter
Supports:
No
Post-Printing
If you get stringing with your printer this model will create a ton of them. If the stringing is thin enough you can take a lighter and quickly pass the model over the flame and the strings should melt away to problem. But don't hold the flame in the same spot too long or you'll start melting the model.
Category: Buildings & Structures