1 / 14
Tacoma (Gen 2 & 3) Cup Holder Phone Rest — zdjęcie 1
1 / 14

Tacoma (Gen 2 & 3) Cup Holder Phone Rest

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter that utilizes the console cup holder to hold phone.

Ocena
5 / 5
Polubienia
24
Pobrania
93
Wydruki
1
Wyświetlenia
2460
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

---------Update 2/27/25------------------------------------
Added version compatible with gen 3 dimensions.
Updated base to fit new phone dimensions (Samsung Galaxy A54 5G).
This can be modified to fit your phone but should fit a range of current smart phones.
Re-printed in PETG as the PLA did warp over time.
Printed on Bambulab X1-C with PLA interface. This worked out ok and can recommend.
Unable to upload the gcode to this site as it has “unsupported code” when exported from Bambu Studio. 

-----------------------------------------------------------------

Phone rest designed to convert the center console cup holder into a phone rest.
For V1.0 used dimensions for gen 2  cup holder.  It is undersized for gen 3.
Working on version to be compatible with gen 3 
4 perimeters used/ 15% infill
Snug supports used on underside of tray (see picture).
Originally designed to fit Motorola g7 but can be modified to fit your phone.
Printed in PLA+, 0.4mm resolution to test.
Part length is at limits of the mini.  Skirt loops must be removed to stay in print area.
 

Tagi