Parametrized HoneyComb Wall with Angled Upper Wall

Customizable OpenSCAD version of the Honeycomb Storage Wall that allows custom grid sizes and the ability to add walls.  You may need to play with the rows/columns to get the correct amount since the angled top wall will cut off part of the grid. Also, to get the angled wall to mesh properly between multiple sheets, you will need to enable the ‘flip_staggering’ parameter for every other piece (as well as for the sheets underneath the flipped versions).

This section was taken from the original model that this is remixed on so that people don't have to go searching.

About OpenSCAD

OpenSCAD is a free software that facilitates parametric 3D modeling. If you are unfamiliar with OpenSCAD, I really encourage you to try it out. There is a wealth of fantastic models readily available that allow tweaking till your heart's content.

Instructions

New to OpenSCAD? No problem! Just follow these steps to start generating your own custom models:

1. Download and install OpenSCAD (its free!): https://openscad.org/downloads.html
2. Open the model file with OpenSCAD. These typically use the “.scad” extension.
3. Adjust the model parameters in the “Customizer” section as desired. 
   • The “Customizer” section will be visible by default on right side of the window.  If not, it can be toggled through the top menu (Window=>Customizer)
4. Press F5 (or the “Preview” button at the top menu) to preview the model.
5. Press F6 (or the “Render” button at the top menu) to generate the model.
6. Press F7 (or the “Export to STL” button at the top menu) to save the exported STL to your computer.