Tea Light Haunted House
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This haunted house opens up to allow the addition of an LED tea light candle
- Ocena
- 4,973 / 5
- Polubienia
- 3472
- Pobrania
- 8282
- Wydruki
- 216
- Wyświetlenia
- 42 654
- Oceny
- 183
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Public Domain
*Edit 10/8/23 - Non-AMS/MMU Version now available!
This haunted house opens up to allow the addition of an LED tea light candle.
Check out my other holiday models here.
Print Settings & Assembly
The roof requires a very small amount of supports.
AMS/MMU Version
House Facade is a 3MF with 2 separate parts. For it to work properly, the windows need to be changed to white or transparent. Once printed, the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top.
Non-AMS/MMU Version
The windows need to be printed separately. Once printed, the windows need to be glued to the back of the facade. Then the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top.
Designed with Fusion360
The filaments used in the pictures above:
- Bambu Lab Matte Charcoal PLA
- GIANTARM Transparent PLA