M-LOK Compatible K-Grip Foregrip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a K-style M-LOK compatible foregrip that has been remixed to allow for button-head M-LOK screws.
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 499
- Wydruki
- 0
- Wyświetlenia
- 2019
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's an MP5 style K-Grip! The original author provided two additional files - the short and the long locking tab. These press into place, and should probably be glued. I've printed a few of these now using carbon fiber filament, and they work good and function great!
This specific version has been modified slightly on the geometry to reduce the sharp edges that carbon fiber filament leaves, and has also been modified to accept flat head screws.
I tested durability on a knock off M-LOK rail I had kicking around in my parts bin, and I actually bent the rail before breaking the grip, so this guy is good to go with the proper print settings! I would avoid PLA if possible, but unless you're doing mag dumps you're likely to be fine.