House A/C Vent Lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lever to keep a ceiling A/C vent in-place and closed.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Backstory
My house's A/C filter grate had the metal lever that kept it locked in place no longer would stay in the hole, so it needed a replacement that would work. I modeled a very similar mechanism with slight tolerance differences for the part for the hole so it would work. I have no idea the brand of the original grate.
I designed it in Alibre Design.
Print Recommendations
I printed it in PETG, it needed to be able to flex, PLA kept breaking, so I would highly recommend against using that. Print it flat, shouldn't need any support. I did 100% infill since I needed it to be strong since it was holding metal in place.
Hardware/Assembly Information
It should pop into the hole if your vent grate is similar to mine. It is pretty close to the original design, so should operate in a similar manner. You just push to engage and pull on the part to disengage.
Usage Recommendations
I have had my part in use for over three months without having to replace it, there have been a couple of A/C filter replacements since then without any issues.