Ahsoka swivel mix and match earrings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made these earrings the bottom part has a hinge which can swivel. It can be printed in two pieces and assembled.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 247
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ahsoka Tano swivel mix and match earrings
If you want to support me more here is my makerworld link, like and download, thank you!: https://tinyurl.com/mrfdv58 ←add a j to the end because pritnables is petty
the “body” and “swivel” parts can be printed separately, the swivel part can be snapped into the body, so mix and match bodies and swivel colors as you wish. I printed the body in orange and the swivel in white and blue.
The swivel part can be printed with dual colors without an AMS by making 1 filament switch, the last 3 layers are just the striped layers just add a pause just before layer 50 with .1mm layer height then swap to the blue (or any color) then hit go.
.1mm Layer height
.4mm nozzle
15% infill