P90/PS90 Light Mount (Surefire Pro Series)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Simple light mount for the P90/PS90 from FN-Herschel or it's Airsoft Derivatives to mount a Surefire Pro series light
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 769
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Mount designed to interface with the optics mounting screws on an FN P90/PS90, The mount is compatible with all Surefire Pro Series light bodies (the ones with the hinge mount) Using OEM Hardware
Please Note that as this is a functional device/product: it should be printed using AT MINIMUM 5 Walls and High or 100% Infill and printed out of a structural/engineering filament such as PET-CF, PA-CF, PC-CF, PC, PA (Nylon), ABS, ASA, PEEK, PEKK, Etc.
(Shown Printed on a BambuLabs X1C with PAHT-CF in around 21 Min)
The model was optimized to be printed with the bottoms of the screw holes facing down and with no Supports. Please again note that if you print it from a material like PLA, or PETG you run the risk of both destabilizing the optics mounting as well as the light itself which could result in the loss of your Light and Zero… Please ensure that the Light is in some way Affixed to the Mounting surface with a Lanyard of some kind if you are afraid of losing it.