1 / 13
QUBE 500 Monitor Mount — zdjęcie 1
1 / 13

QUBE 500 Monitor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a monitor mount for the Cooler Master QUBE 500 case that can be used to save space or for aesthetics.

Ocena
0 / 5
Polubienia
25
Pobrania
73
Wydruki
0
Wyświetlenia
1030
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
GNU General Public License v3.0

This mount would allow for mounting a monitor directly to the QUBE 500 case.  This might be useful if you are short on space or if you just like the way it looks!

The mounting plate has holes for VESA 100 and VESA 75 hole patterns.  This mount would use 4 M4x20mm screws (designed for socket cap, but you could adjust the model if you wanted/needed).

The components that slide to mate have a designed 0.15mm clearance, but again, you could adjust the step files if you needed to.

I have included pictures of multiple ways to slice, and included some openings in the design to account for supports.  I have also included a test template to print out and put against the back of your monitor to make sure there would be room for wire clearance.  I envision trying to route wires between the two case brackets around to the case i/o.

There is some room for up/down and left/right adjustment using different mounting holes, but if you needed tilt, you'd have to go into the model and adjust some angles there.

The monitor shown is a 27in size monitor.

NOTE that I have not been able to test the functionality of this print, so use with caution.

Tagi