1 / 1
Hole Inset Extenders for "whack a mole CATtoy"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extenders for the hole insets to prevent the moles from being stuck by being pushed too far in.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are just hole insets of the “whack a mole CATtoy” for preventing the moles from being stuck when they are being pushed too far in.
The extenders have cutouts for allowing the arms to go all the way up. For this reason I recommend gluing them on only after you are done with assembling everything else.
The cutouts were implemented using the negative volume feature of PrusaSlicer.