CEN-TECH 100 ft Open Reel Measuring Tape center hub replacement parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the parts for a CEN-TECH 100 ft Open Reel Measuring Tape center hub replacement.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are the parts for a CEN-TECH 100ft (30m) Open Reel Measuring Tape center hub replacement. There are four parts to replace when the center hub gets broken.
I had the tape attach pin break off the Inner Spool which also damaged the other parts.
I reused the handle and its attach role pin as they did not break.
Hardware Required
(2) 3 x 15mm countersunk screws
(1) 3 x 10mm button head screw
The 3x15mm screws are used to attach the HandleEnd to the InnerSpool after everything is assembled in the CEN-TECH case.
The 3x10mm screw is used to attach the OuterEnd to the InnerSpool when assembly in the CEN-TECH case.