128x64 OLED Box with Space for Rotary Encoder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a little breakout box with an OLED and rotary encoder so I could easily navigate and see which disk I had…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 164
- Wydruki
- 1
- Wyświetlenia
- 1280
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Wanted a little breakout box with an OLED and rotary encoder so I could easily navigate and see which disk I had selected on the internally mounted FlashFloppy Gotek boards in my Amiga 500 & Atari ST, rather than use the file selector.
Found many little boxes to house the 128x64 OLED but none that had space for the rotary encoder so I took one of the designs and expanded it. Box is deeper than the one I remixed to accommodate the back of the rotary encoder with wiring and obviously wider. Box just clips together as per the remixed one no so glue needed and also has holes in the back to let the wiring through.
FYI I have had some issues using 30cm DuPont wires with the OLED screen, basically the screen doesn't always come on. It may be the screens I'm using but 20cm wires seem to work fine. I've therefore only use 20cm ones or replaced DuPont with wires soldered direct to the pins/PCB.
Added Left Side version
*Originally from my Thingiverse listing and printed on my Anycubic i3 Mega, photos are from that print which I'll update if I print on my new Prusa MK3S+