VW T4 Cup Holder Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for a cup holder in the VW T4 transporter bus.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 335
- Wydruki
- 0
- Wyświetlenia
- 2342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v2.0
This is a holder for cans, bottles and cups. Once attached to a surface it can be folded away flat. I did not add any screw holes but it is easy enough to add them to your needs, either before printing or afterward with a small drill or a heated needle. Or just glue it in place. I designed this specifically to replace a broken cupholder in a VW T4 bus but it can be used in other vehicles, on walls, cupboards, tables or whatever you come up with.
parts list
- 1x BackPlate
- 1x Base
- 1x HolderRing
- 2x HingeOuterFlat
- 2x HingeOuter
- 4x HingeInner
printing instructions
I printed everything in PLA with a layer height of 0.28mm, infill 100% and supports (for the holes).
assembly
Connect the base and the holder ring to the back plate using the hinges. I used the outer hinge parts on the inside and the inner hinge parts from the outside (outer and inner hinge parts are named regarding the hinge itself). For me, it is a press fit using pliers. If yours sits loose, use a little bit of glue.