Raspberry Pi 3A+ with Pi1541 IO Hat Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi 3A+ with Pi1541 IO hat case giving full access to the main outputs of the IO hat, including the two 6pin…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1061
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Raspberry Pi 3A+ with Pi1541 IO hat case giving full access to the main outputs of the IO hat, including the two 6pin DINs, the 5 side buttons, the 2 LEDs & the OLED connector. Also has a commodore logo over the GPIO buzzer so it is not covered up and a larger logo on the bottom doubling as an air vent.
Print top and bottom sections and 2 x stands for the hat
Secured with 7.5mm M3 pan head screws (black)
Added a second version with holes for mounting an OLED cover, cover also added
*Originally from my Thingiverse listing and printed on my Anycubic i3 Mega, photos are from that print which I'll update if I print on my new Prusa MK3S+