BMW Rear Bolster Clip 52 20 9099555
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for BMW 52 20 8099555 rear seat side bolster clip.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 138
- Wydruki
- 1
- Wyświetlenia
- 697
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Replacement for BMW 52 20 8099555 rear seat side bolster clip
Designed for my e46 coupe after the clip broke when removing the bolster panel and I found how expensive a replacement clip was to obtain.
Likely fits other e46 3 series, e53 x5, e81 1 series and e92 3 series models too.
Printed in PLA+, but would recommend using a higher temperature filament like ABS, PETG, or Nylon if available.
Might require some very slight modification to work on your specific car depending on printer tolerances.
Reupload note: so far has been in my car for 2 years and remains fine.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
50%
Filament: Esun PLA+ Black
Notes:
Print in original orientation using tree supports, reduce the angle value so the inside of the hook is only supported at the tip
Be careful removing interior supports so as to not break the flexible hook.
Category: Automotive