1 / 2
21700 battery to 26650 or 26800 sleeve for Vase mode
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple sleeve to use 21700 batteries in a 26650 or 26800 flashlight. Print in vase mode
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Print in Vase mode, no floor layer. Should take only 40-50min in most 0.4mm printers.
Might need spacers to work in a 26800 flashlight, I used 4 of the Convoy 26mm spacers for my D4Sv2.
Printed using 0.4mm Ender 3 v2
Designed in FreeCAD 0.19