Build Plate Guide Extensions for Bambu Labs X1 and P1 printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These increase the height of the plate guides and make it easier to align the plate while inserting
- Ocena
- 4,45 / 5
- Polubienia
- 140
- Pobrania
- 918
- Wydruki
- 20
- Wyświetlenia
- 3779
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I installed my plate so it was slighty resting on the lip of the guide… So I wanted something to make it unlikely to repeat in the future.
These clips snap on and bring the height of table plate guides up just enough to make it easy to line up the plate, without getting in the way of the print head.
I printed mine in PETG so they would better handle the interior temperature of the enclosure, and use an extra fine 0.08mm layer height to make sure the guide edge is as smooth as possible while still allowing it to be printed laying down without support.
Quick print and easy to install, I hope you like them!