1 / 5
Creality K1 Building Plate Holder - 4 Slot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had the need to store Creality K1 Printer build plates. I looked for one and didn't find one I liked so I made one
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 319
- Wydruki
- 1
- Wyświetlenia
- 1272
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (42)Powiązane
I had the need to store extra Creality K1 Printer build plates (four). I looked and didn't find one I liked so I designed my own in Fusion360. I split the model into two half sections to make it easier to print on smaller size build plates. The connecting blocks have a 1 mm channel on the top side for additional super glue when connecting the halves. I printed the pictured models using Creality Hyper PLA.