1 / 3
TRG 42 Cheek piece — zdjęcie 1
1 / 3

TRG 42 Cheek piece

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The bolt on the TRG 42 in 300 win mag hits the standard cheek piece when it is raised using the packers made by Sako,…

Ocena
0 / 5
Polubienia
0
Pobrania
21
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

The bolt on the TRG 42 in 300 win mag hits the standard cheek piece when it is raised using the packers made by Sako, also the standard 2 packer height does not raise the cheek piece is high enough if the scope is large.

The is also a problem if you need to remove the bolt on the range as the standard raised cheek piece stops you doing this without removing it.

These cheek pieces solves both problems. Could be used on any Sako TRG rifle

Category: Other

Tagi