1 / 3
fence end cap for double stick mats / Anstoßkappen für Abeckleiste Doppelstabmattenzaun
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
end cap for cover strip on double stick mats
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 756
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
On the corner posts of the fence there were only end caps covering the post itself and not the cover strips. So I made end caps for the cover strips themselves.
The dimensions of the cover strips are 40.3mm x 4.15mm.
Printed on my Voron 2.4, the caps fit snugly.
I printed them in ABS so they can withstand the sun better than PLA.