1 / 4
Grip for a 4 mm Allen Key / Griff für einen 4mm Inbus Schlüssel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grip for a 4mm Allen Key / Griff für einen 4mm Inbus Schlüssel
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 932
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (23)Powiązane
This is a simple grip for a 4 mm allen key.
Additional parts:
- Two M3 threaded insterts
- Two M3 x 8 mm screws
The ring must be glued in.