120mm turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
120mm turntable / turnable base. To be used with 6904 ball bearing
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 1035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
120mm turntable / turnable base. To be used with 6904 ball bearing. The bearing fits snug, no screws or glue needed.
The thing can take a decent amount of weight (>2kg) even when center of mass is tilted to one side, then it would rest on the inner edge and still turn.
Insert the bearing to the bottom part first (not mandatory).
We would recommend to remove upper and lower solid layers for bottom part and apply honeycomb infill for cool looks, reduced weight, faster print time and leaving easier possibility for opening the thing if needed.
3-4pcs of rubber feet is recommended.
Feel free to modify, share or sell in any format.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Prusament PET-G Jet Black / Prusa Orange
Notes:
Works with any type of rigid filament but we would recommend and have tested PETG.