Portable chess set (no assembly, no supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 120mm chess set is the perfect size to fit inside your backpack and requires no postprocessing - print&play!
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 207
- Wydruki
- 1
- Wyświetlenia
- 1697
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This classic chess set is 120mm wide and about 24mm tall, making it the perfect size to fit inside your backpack so you can play on the run.
All the figures have the same 12mm diameter base and range from 22 to 34mm in height and can fit in the two underside compartments - they are small but very playable!
The sturdy and colorful design ensures great fun and no worries - not even in the printing process:
- Print the “black” part in your darkest color, and don't remove it from the print bed
- Purge your extruder really well and change filament
- Print the “body” part in your accent color on top of the black one
Important notes:
- The "black" and “body” pieces should already be aligned in your slicer - check to make sure they will print properly
- Turn off all supports and bed adhesion methods
The model is designed to work well with 0.2mm layer height: in this condition it shouldn't take more than 3h for the whole case and about 20min for each figure.