Chest in Minecraft style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple chest, size 7,5cm x 7,5cm x 7,5cm Remark: The tolerance between the rails is 0,3mm, if anyone needs…
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 807
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple chest, size 7,5cm x 7,5cm x 7,5cm
Remark: The tolerance between the rails is 0,3mm, if anyone needs less, please let me now.
When the Cover doesnt slight smoothly in the rails, use some sandpaper to make it work.
After sanding it should slight very easy and smooth.
UPDATE:
My son managed somehow to destroy the box by let it falling down on hard ground.
So I redisgned a little bit and make it more stable by moving the rails 1,5mm more inside.
The new stl-files are marked with "_v2".
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
15%
Filament:
Whatever you have PETG - PLA
Notes:
Just added an support -see pictures
Please use at least 3~4 perimeters.
Category: Organization