Moccamaster Coffee Filter Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Version: 1.2.
- The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight.
Version: 1.1.
- The connection holes on both parts are now hidden, when the lid is assembled.
- Sliced for ABS only. Slice yourself for other materials, if needed.
The original Moccamaster filter coffee lid broke when I suddenly dropped it on the floor. I tried to glue it first. Anyway, I took decision to make my own and print in beautiful Prusa's Prusament orange, PET-G.
Do not use PLA, because it is quite soft already with 60°C.
When you are assembling these two parts, use a bit (not longer than 3mm, 7pcs) of filament and quick glue.
IMHO it looks better than original one.
Note: after two weeks of use of PET-G printed part, I got temperature deformation. I have print it in ABS now, to test temperature durability. PET-G is not enough good! Let me know your result in the comments. You may use ASA as well.