Docreate 30Gear Spot Welder Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple box to store my spot welder in.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 4694
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The case is based on my parametric “Rugged Box” and is resized to fit the Docreate Gear30 Spot Welder.
Support my work
For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).
If you want to support my work directly, you can buy me a coffee.
If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |
Also check out my other models.
Assembly
You will need six M3x30 screws to assemble it (s. below).
If you want to fixate the spot welder when closed, use a fitting piece of foam with a thickness of ~10mm for the lid.
Screws
I like these screws which have a nice round head:
Allen hex socket button head screw
Or, if you want no screw head at all, which I personally like even more:
Hex socket set screws
Note: I recommend the stainless steel ones. The blackened ones are oily and have to be cleaned.